FPMM SERIE 2/15 MM

Multi-Head drilling machines

for the execution of 2-3 or 4 holes at the same time

Especially suitable for medium/big glass companies for the production of mirrors, shelves for furniture, laminated glass and household appliances

  • Available motor driven or manual adjustment of drilling heads
  • Fine adjustment of the drill bits or automatic
  • Glasses are held in place automatically during drilling
  • Adjustable spindle rotation speed
  • Drilling heads are controlled by hydro-check units
  • An automatic device ejects the glass cores into an appropriate container
  • Automatic start/stop of water flow over the heads
  • Head movement controlled by a PLC
  • Close–circuit water cooling system
  • Protection and safety devices to protect the operator
  • Electrical system in compliance to the EC in force

Datasheet

WHEEL COMPOSITION fpmm2

spessori di vetro
thickness ranging
2/15 mm
altezza del piano di lavoro
height of work surface
1.035 mm
potenza installata
total capacity
4 kW
capacità vasche
tank capacity
250 l
consumo aria
air consumption
40 Nl/min
peso totale
overall weight
1.690 Kg
diametro max di foratura
max drilling diameter
3/40 mm
velocità dei mandrini
velocità dei mandrini
1.400/2.800 rpm
profondità del braccio
arm dept
500 mm
distanza tra le teste
distance between heads
min. 175 mm max 1.800 mm

WHEEL COMPOSITION fpmm3

spessori di vetro
thickness ranging
2/15 mm
altezza del piano di lavoro
height of work surface
1.035 mm
potenza installata
total capacity
7 kW
capacità vasche
tank capacity
250 l
consumo aria
air consumption
60 Nl/min
peso totale
overall weight
1.860 Kg
diametro max di foratura
max drilling diameter
3/40 mm
velocità dei mandrini
velocità dei mandrini
1.400/2.800 rpm
profondità del braccio
arm dept
500 mm
distanza tra le teste
distance between heads
min. 175 mm max 1.800 mm

WHEEL COMPOSITION FPMM4

spessori di vetro
thickness ranging
2/15 mm
altezza del piano di lavoro
height of work surface
1.035 mm
potenza installata
total capacity
8,5 kW
capacità vasche
tank capacity
250 l
consumo aria
air consumption
80 Nl/min
peso totale
overall weight
2.200 Kg
diametro max di foratura
max drilling diameter
3/40 mm
velocità dei mandrini
velocità dei mandrini
1.400/2.800 rpm
profondità del braccio
arm dept
500 mm
distanza tra le teste
distance between heads
min. 175 mm max 1.800 mm
legenda

FOR FURTHER DETAILS, ORDERS OR REQUEST FOR ASSISTANCE


OUR TECHNICIANS WILL REPLY YOU WITHIN 24 HOURS

Straight grinding machines pencil edge

Ogee and half bullnose edging. Cerium oxide polishing. Intended for small and medium glassworks to manufacture mirrors, bathroom furnishing shelves and laminated glass.

Read More

Straight grinding machines flat edge

Arris - 45° front chamfering and synthetic cerium oxide polishing option. Intended for mirrors, bathroom furnishing shelves, laminated glass, table tops and staircase steps.

Read More

Turnover unit

Sheet 90° rotation. To be combined with straight grinding or bevelling machines.

Read More

Double Edging Machines Pencil Edge

Intended for simultaneously grinding and polishing two glass sheet opposite faces to process pencil edge.

Read More

Double Edging Machines Flat Edge

Intended for simultaneously grinding and polishing two glass sheet opposite faces to process flat arrised edge.

Read More

Loader unloader machines

To be combined with horizontal grinding or drilling machines.

Read More

Straight Beveling Machines

Bevel angle: 0° to 45°. Bevel cerium oxide polishing.

Read More

Drilling Machines With Opposing Heads

Intended for horizontal drilling. Automatic and semiautomatic version available.

Read More

Multi-heads Drilling Machines

Motor driven and manual version available. Micrometric or automatic drill bit adjustment.

Read More

Vertical Drilling Machines

To process holes and notches. Fully automatic version.

Read More